Pump: How Reciprocating Pump Works?

A Reciprocating Pump is a hydraulic device used to transfer liquid from one place to another.

In hydraulic engineering, various types of Reciprocating Pumps are used.

The Pump which raises Water from the Lower Level to the Higher Level by the Reciprocating Action of the Piston inside the Cylinder is known as Reciprocating Pump.

Here in this post, I will like to share information on the reciprocating pump with you.

  • A Reciprocating Pump, in its simplest form, consists of the following parts

01) A Cylinder in which Piston works. The movement of the Piston is obtained by a Connecting Rod, which connects the Piston and the Rotating Crank.

02) A Suction Pipe, connecting the source of Water and the Cylinder.

03) A Delivery Pipe, into which the water is discharged from the Cylinder.

04) A Suction Valve, which admits the flow from the Suction Pipe into the Cylinder.

05) A Delivery Valve, which admits the flow from the Cylinder into the Delivery Pipe.

  • So, Here it comes Working on Reciprocating Pump

During the Suction Stroke, the Piston moves from Zero to 180 Degree (which means towards the right direction).

Thus creating a Vacuum in the Cylinder.

This Vacuum causes the Suction Valve to open and Water enters the Cylinder.

During Delivery Stroke, the Piston moves from 180 Degree to 360 Degree (which means toward the left direction).

Hence it increases pressure in the Cylinder.

An increase in Pressure, causes the Suction Valve to close and Delivery Valve to open, and Water is forced into the Delivery Pipe.

A Hydraulic Reciprocating Pump is also called a Positive Displacement Pump.

As it discharges a definite quantity of Liquid during the Displacement of its Piston.

This is why a Hydraulic Reciprocating Pump is ideally suitable for Grouting Operations in Dam Foundation.

To obtain a uniform Discharge, the Air Vessels are fitted to the Suction and Delivery Pipe, close to the Cylinder of the Pump.

An Air Vessel is a Cast Iron closed chamber, having an opening at its base, through which the water flows into the Vessel or from the Vessel. The Vessel is filled with Compressed Air.

Besides this information, you are suggested to read something more from below engineering books

To get the more details about the topic, I further recommended reading

If you like the post, share it with your friends and also on social sites.

Recent Posts

Energy Conservation: 11 Proven Ways to a Better Energy Conservation

Energy conservation may be the best solution to fight the energy problems we are facing today. It will also help…

Geothermal Energy: 7 Things You Must Know About Earth’s Heat Energy

In engineering, geothermal energy definition is “The heat energy generated and stored in the Earth”. The prefix “Geo” is a Greek word, meaning…

Tidal Power: A Brand New Alternative Energy Source for Electricity Generation

Tidal power or tidal energy is an alternative energy source of hydropower from which you can generate electricity. As tidal energy doesn’t produce any…

Hydroelectric Energy: 10 Things You must Know About hydroelectricity

Hydroelectric Energy is almost all clean energy sources compared to all other renewable energy sources. Where Nuclear Power generates radioactive waste or wind energy generates…

Alternative Energy: A Detail Guide on Nuclear Power That You Must Read

There are some alternative energy sources available to cope with the increased demand for electricity. These alternative energy resources are…

Green Energy: Your Complete Guide on Wind Power to Generate Electricity

Green Energy means not the color of energy. Green energy is that source of renewable energy which you can use again and…