Many of us know that Hydraulic Crane is a Device that is used in engineering plants to lift Heavy Loads for shifting purposes.
These Cranes have different types of Working principles and Driving Media.
You can operate Crane with Electric Power or Water also.
Electric Driven Cranes are used in Manufacturing Plants whereas Hydraulic Cranes are widely used on Dock Siding, Warehouses, or Big Workshops.
A Hydraulic Crane can lift a heavy load of up to 250 Ton in weight.
In this post, I will cover the details of the Hydraulic Crane.
A Hydraulic Crane in its simplest form consists of a Vertical Post, Tie and Jib having Guiding Pulleys.
Hence all these parts are the basic requirement of a Hydraulic Crane.
Jigger is provided near the foot of the Vertical Crane Post.
The Jigger consists of a fixed Cylinder, having a Pulley Block and containing a Sliding Ram.
One end of the Ram is in contact with water and the other carries a Pulley Block.
A Chain or Wire Rope, one end of which is fixed, is taken round all the Pulleys of the two Blocks, through the Vertical Post, and finally over the Guide Pulleys.
A Hook is attached to the other end of the Rope for handling the Load.
There is a pipe connection for supplying water under High Pressure to the fixed Cylinder of the Jigger.
The Load to be lifted is suspended on the free end of the Wire Rope. Hence The Water, under High Pressure, is admitted into the Cylinder of the Jigger.
This Water, Forces the Sliding Ram to move towards the left.
This outward movement of the Sliding Ram makes the Pulley Block move outwards.
Due to the increased distance between the two Pulley Blocks, the Wire Rope is pulled and the load is lifted up.
If the load is required to be shifted, the Vertical Post, of the Hydraulic Crane, can be rotated through the desired Horizontal Angle also.
I hope, now you understand the working of a Hydraulic Crane.
So, Here you find the Best Engineering Resources for further details
To get the more details about the topic, I further recommended reading
Energy conservation may be the best solution to fight the energy problems we are facing today. It will also help…
In engineering, geothermal energy definition is “The heat energy generated and stored in the Earth”. The prefix “Geo” is a Greek word, meaning…
Tidal power or tidal energy is an alternative energy source of hydropower from which you can generate electricity. As tidal energy doesn’t produce any…
Hydroelectric Energy is almost all clean energy sources compared to all other renewable energy sources. Where Nuclear Power generates radioactive waste or wind energy generates…
There are some alternative energy sources available to cope with the increased demand for electricity. These alternative energy resources are…
Green Energy means not the color of energy. Green energy is that source of renewable energy which you can use again and…