The hydraulic devices in hydraulics engineering are the devices that use liquids to transmit pressure equally from one point to another.
In many Hydraulic Devices, Bernoulli’s Equation has been widely applied. It is used for the derivation of many Engineering Formulas also.
Hence In this post, I will cover its Application on the three Main Hydraulic Devices.
It is the short pipe that converges from Diameter d1 to a smaller diameter d2.
It is also known as the “Inlet” of the venturi meter.
The slope of the Converging sides is between 1 in 4 or 1 in 5.
This is a pipe, which Diverges from Diameter d2 to a large Diameter d1.
It is also known as the “Outlet” of the Venturi meter.
The Length of the Divergent Cone is about 3 to 4 times that of the Convergent Cone.
This is used to measure the Discharge in a pipe.
An Orifice Meter in its simplest form consists of a Plate having a Sharp Edge circular Hole, known as an “Orifice”
This Plate is fixed inside the pipe.
Also, a Mercury Manometer is inserted to know the difference in Pressure between the pipe and the Orifice.
It is the instrument to determine the Velocity of Flow at the required point in a pipe or stream.
Hence Pitot tube consists of a glass tube bent through 90 degrees.
The lower end of the Tube faces the direction of Flow.
So, the Liquid rises up in the tube to the Pressure exerted by the Flowing Liquid.
By measuring the rise of a Liquid in the Tube, we can find out, the Velocity of the Liquid Flow.
I hope this information will help you to better understand Hydraulic Devices.
Besides this information, you are suggested to read something more from below engineering books
So, Here you find the Best Engineering Resources for further details
To get the more details about the topic, I further recommended reading
If you like the post, share it with your friends and also on social sites.
Energy conservation may be the best solution to fight the energy problems we are facing today. It will also help…
In engineering, geothermal energy definition is “The heat energy generated and stored in the Earth”. The prefix “Geo” is a Greek word, meaning…
Tidal power or tidal energy is an alternative energy source of hydropower from which you can generate electricity. As tidal energy doesn’t produce any…
Hydroelectric Energy is almost all clean energy sources compared to all other renewable energy sources. Where Nuclear Power generates radioactive waste or wind energy generates…
There are some alternative energy sources available to cope with the increased demand for electricity. These alternative energy resources are…
Green Energy means not the color of energy. Green energy is that source of renewable energy which you can use again and…