Anti Freezers: Why a Good Quality Anti Freezer is Required in Engine

To prevent water from freezing, Anti Freezers are used in an internal combustion engine.

Some heat is generated inside the Cylinder while the Engine is in working condition.

Hence to keep the cylinder in cool condition Air or Water is used as Cooling Media.

When the engine is cooled by circulating water around Cylinder then the Engine is called the ‘Water Cooled Engine“.

If the Engine is kept idle (without use) for a long time there is a possibility of freezing of water. This mostly happens in winter.

The water may freeze and expands leading to fractures in Water Jackets, Water Circulating Pipe, or Radiator.

To lower the freezing temperature, a certain mixture is added to the water. This mixture is known as “Anti Freezers” in automobile engineering.

To avoid wastage due to Evaporation, its boiling point should be as high as water.

The purpose is to prevent a rigid enclosure from undergoing catastrophic deformation (such as cracking or bursting) due to expansion when water turns to ice.

Commercially, either the additive or the mixture may be referred to as anti-freezers.

So, The important qualities of ideal Anti Freezers are

  • Anti Freezers should easily dissolve in water
  • It should be reasonably cheap
  • Should not deposit any foreign matters in the Water Jackets, Pipes and cause no harmful effects to any part of a cooling system
  • No single Anti Freezers satisfy all these requirements.
  • The material in common use is Glycerin, Ethylene Glycol, Propylene, Alcohol, and the mixture of Glycerin and Alcohol
  • If Alcohol is used, frequent checking with a Hydrometer is required.
  • Glycerin, Ethylene, and Propylene Glycol though have a high initial cost, prove cheap in long run, provided proper care is taken against leakage because their mixture does not evaporate

Besides this information, you are suggested to read something more from below engineering books

So, Here you find the Best Engineering Resources for further details

To get the more details about the topic, I further recommended reading

If you like the post, share it with your friends and also on social sites.

Recent Posts

Energy Conservation: 11 Proven Ways to a Better Energy Conservation

Energy conservation may be the best solution to fight the energy problems we are facing today. It will also help…

Geothermal Energy: 7 Things You Must Know About Earth’s Heat Energy

In engineering, geothermal energy definition is “The heat energy generated and stored in the Earth”. The prefix “Geo” is a Greek word, meaning…

Tidal Power: A Brand New Alternative Energy Source for Electricity Generation

Tidal power or tidal energy is an alternative energy source of hydropower from which you can generate electricity. As tidal energy doesn’t produce any…

Hydroelectric Energy: 10 Things You must Know About hydroelectricity

Hydroelectric Energy is almost all clean energy sources compared to all other renewable energy sources. Where Nuclear Power generates radioactive waste or wind energy generates…

Alternative Energy: A Detail Guide on Nuclear Power That You Must Read

There are some alternative energy sources available to cope with the increased demand for electricity. These alternative energy resources are…

Green Energy: Your Complete Guide on Wind Power to Generate Electricity

Green Energy means not the color of energy. Green energy is that source of renewable energy which you can use again and…