Water Cooling System Parts play a major role in the cooling of an engine.So, to cool the internal combustion engine, the air-cooling or water-cooling method is employed in automobile engineering.There are various cooling systems are available out there.But Impeller Thermo-siphon system has required…
Detonation means the sudden and violent knocks experienced in an internal combustion engine.By engineering means, this knock is set up by a high-pressure wave giving loud pulsating noise.This occurs when it strikes against cylinder walls, cylinder head, and piston.Here in this post, I am…
The suction valve and the exhaust valve are used to complete the suction & discharge stroke in Internal Combustion Engine. A suction valve allows the fresh charge of the air-fuel mixture inside the cylinder. This mixture is compressed and burnt by other…
In Internal Combustion Engine, some particular terms are used to describe the process.For example, carburetion, scavenging, firing order, detonation, etc.Actually, these terms are the one word for that particular activity.It might possible, that an automobile engineering or mechanical engineering concern person is well…
Diesel knock is experienced in the diesel engine. When a high-pressure wave strikes the cylinder wall, cylinder head, and piston, it results in diesel knock.When sudden and violent knocks are experienced in a petrol engine, these knocks are termed "Detonation".This engineering term, you might…
In automobile engineering, the term "Governing" means the action of varying the fuel supply in accordance with the load demands.So, the engine runs at a practically constant speed.Here in this post, you will find some important methods of governing internal combustion engines…
When we are going to design the combustion chamber of a diesel engine the main consideration we have to keep in mind is the high compression ratio & sufficient turbulence of air. For high compression ratios, overhead valves are more preferred than…
Lubrication is required to reduce the frictional losses between metal to metal rubbing or sliding parts. When two or more metal parts rub on each other, it creates friction in motion. A proper quality lubricant is essential in engineering practice. The quality of lubrication is…
A reciprocating steam engine is used to convert heat energy into mechanical energy.This is an old method of energy generation early engineering practice.Nowadays steam turbines or internal combustion engines are used for the same work.But they have many specialized applications.Hence these steam engines can be classified…
The compound Steam Engine is the oldest form of obtaining power in the engineering sector.This steam engine has more advantages than a simple steam engine.Hence According to an expansion of steam, the engines are classified as simple steam engines, compound, or multi-expansion steam engines.…