Air Cooling: How to Cool Internal Combustion Engine by Air?

Air Cooling is the simplest method to cool down the engine.

When the combustion of fuel takes place inside the cylinder of an internal combustion engine, a very high temperature is developed.

It is, therefore necessary to extract some of the heat from the cylinder into the atmosphere.

It will avoid damage to the cylinder and piston.

Heat also burns lubrication oil and forms carbon.

There is a possibility of seizure of piston inside the cylinder, which will lead to more breakdown and repair costs.

To avoid this, cooling is necessary for engineering utility where the temperature is generated.

engine air cooling system
  • So, How Air Cooling is Done in Internal Combustion Engine?

Air Cooling is mostly used in motorcycles and scooters.

Because the forward motion of the machine gives a good velocity of air to cool the engine.

Air Cooling is also provided in small industrial engines.

In the bigger unit, a circulating fan is employed. But the fan absorbs 5% of the power developed by the engine.

Air Cooling is the simplest method.

Because the heat is carried out by the air flowing over and around the engine cylinder.

In this system, a current of air is made to blow past the outside of the cylinder barrel.

Whose outer surface area has been considerably increased by providing radiating fins?

The cooling fins are arranged so that they are perpendicular to the axis of the cylinder.

  • So, the advantages of an air cooling system are,

In an air cooling system, there is no such problem as corrosion or clogging of the radiator occurs. Since there is no radiator is used (Radiator is used in water-cooled Engines).
 
There is also a complete absence of water freezing in cold weather conditions as in the water-cooled engine.
 
Air Cooling is particularly advantageous where there are extreme climatic conditions.
 
As in the Arctic or where there is a lack of water as in deserts. It gives less starting troubles.
 
Besides the above advantages, this cooling system has some disadvantages also.

Air-cooled engines on average have limited size, non-uniform cooling, and higher working temperatures.

They also produce more noise, give a less petrol economy, lower maximum allowable compression ratio, and lower output.

Besides this information, you are suggested to read something more from below engineering books
 
 
To get the more details about the topic, I further recommended reading
 If you like the post, share it with friends and also on social sites.
Battery Reconditioning Course