Which are the Different Pressure Measured in Engineering

The Intensity of Pressure at any point in a Fluid is the same in all directions when it is at rest.

This is the basic rule in hydraulic engineering you must know.

There is different pressure you had come across in engineering, and out of that here you will find the most important three.

So, here is the three different types of Pressure measured in the Engineering

  • Atmospheric Pressure

It is established that the Air possesses some Weight.

And due to its Weight, Air must exert some force on the surface of the Earth.

The Density of Air is different at different heights due to its property of Compressibility.

The Density of Air has also varied from time to time due to changes in Temperature and Humidity.

Due to these factors, the Atmospheric Pr. of Air cannot be calculated. But you can calculate in the case of Liquid.

The Atmospheric Pr. at Sea Level is 1.03 kg/cm².

It can also be expressed as 10.3 meters of water, in terms of equivalent Water Column or 76 centimeters of Mercury in terms of equivalent Mercury Column.

  • Gauge Pressure

It is the Pressure measured by Pressure Measuring Instruments.

The Atmospheric Pr. on the Gauge Scale is marked as Zero.

Actually Gauge Pr. is always above the Atmospheric.

  • Absolute Pressure

It is defined as the sum of Atmospheric and Gauge Pr. In the case of vacuum, the Gauge Pr. is a minus, and then the Absolute Pr. will be Atmospheric minus Gauge.

If the Intensity at a point is more than the Local Atmospheric, the difference between these two is called “Positive Gauge Pr.”.

However, if the intensity at a point is less than the Local Atmospheric Pressure, the difference between these two is called “Negative Gauge Pr. or Vacuum “.

Besides this information, you are suggested to read something more from below engineering books

So, Here you find the Best Engineering Resources for further details

To get the more details about the topic, I further recommended reading

If you like the post, share it with your friends and also on social sites.

Recent Posts

Energy Conservation: 11 Proven Ways to a Better Energy Conservation

Energy conservation may be the best solution to fight the energy problems we are facing today. It will also help…

Geothermal Energy: 7 Things You Must Know About Earth’s Heat Energy

In engineering, geothermal energy definition is “The heat energy generated and stored in the Earth”. The prefix “Geo” is a Greek word, meaning…

Tidal Power: A Brand New Alternative Energy Source for Electricity Generation

Tidal power or tidal energy is an alternative energy source of hydropower from which you can generate electricity. As tidal energy doesn’t produce any…

Hydroelectric Energy: 10 Things You must Know About hydroelectricity

Hydroelectric Energy is almost all clean energy sources compared to all other renewable energy sources. Where Nuclear Power generates radioactive waste or wind energy generates…

Alternative Energy: A Detail Guide on Nuclear Power That You Must Read

There are some alternative energy sources available to cope with the increased demand for electricity. These alternative energy resources are…

Green Energy: Your Complete Guide on Wind Power to Generate Electricity

Green Energy means not the color of energy. Green energy is that source of renewable energy which you can use again and…