In a petrol engine, petrol derived from crude oil is used as fuel. So, you can run your vehicle smoothly.An internal combustion engine is operated by liquid or gaseous fuel also.Hence, the fuel supply in Petrol Engine is essential for engine running.Actually, gaseous…
There are different Ignition Systems used in engineering by which Fuel may be ignited in Internal Combustion Engines.If the Ignition in Internal Combustion Engine takes place at the end of the Compression Stroke then the engine runs without knocks, with good efficiency.The Compression Ignition Engine is…
The Air-Fuel Ratio plays important role in an internal combustion engine.I.C.Engine air is essentially required to burn the fuel. The oxygen in the air helps for the proper burning of fuel.To obtain excellent combustion results from fuel, the air and the fuel must…
In Engineering different types of Ignition Systems are used in Internal Combustion Engines.Out of that Magneto and Coil Ignition Systems are more important.Hence I will share information on a comparison between these two ignition systems. So, here it comes a Comparison of the…
There is various gases law you have to study in Thermodynamics.Gas is the term applied in engineering to the state of any substance of which the evaporation from the liquid state is complete. Examples are Air, Oxygen, Nitrogen, etc.So, here you will…
The Octane Value of the Fuel will give us an idea of the tendency of the fuel to detonate.Detonation means the sudden and violent knock experienced in a Petrol Engine, due to the Anti-Ignition of a portion of the Fuel.In automobile engineering, octane…
Vibrations beyond the permissible limit will be a major reason for the breakdown of any machine, especially an air compressor.It is important to protect your compressor from excessive vibrations developed due to the operation or any other reasons.Unfortunately, many plants are not…
HDATS or High Discharge Air Temperature Switch will protect your air compressor from the breakdown in case of high discharge air temperature.It is most important to prevent your Air Compressor from the breakdown. Because breakdown not only increases maintenance cost but also suffers your Engineering Production.Here HDATS…
LCWFS or Low Cooling Water Flow Switch is an important safety switch to prevent the breakdown of an air compressor.When there is no flow of water or insufficient flow this switch will operate and stop the compressor.Instead of giving details about the…
Mounting LOPS or Low Oil Pressure Switch is an important safety major all maintenance engineers should take to prevent the breakdown.It is very important that the air compressor should run in good working condition to deliver the best result. LOPS will take care…